Tricky Air Bed Shocks


Tricky Air & Billet has been manufacturing stainless steel air suspension kits for the motorcycle industry for over 20 years. The team at TAB is also into air-suspension trucks. We also know that in the truck world if you want to get low, you need to either motify your frame with a high C-notch or start with a well built new frame that has the bed section taller to allow the axle to travel higher.

Frames on air-ride trucks need a raised floor bed. When you make a raised floor, it needs to be lifted in order to gain access to your fuel cell or just show off your suspension work. This is why TAB invented "Bed Shocks". Our Bed Shocks are made just like our shocks for the motorcycle industry out of stainless steel but, just with a longer stroke to achive lift.

"Bed Shocks" are designed to work two different ways. 1st way is by tapping into your existing air tank from your air-ride on your truck and into our instant up solenoid pack which controls both up and down of your floor. The 2nd way is to use one of our small on-board compressors/solenoid kits for the up/down proccess. There are several ways to adjust the speed of the shocks by simply adjusting the rebound control on the shock body itself or on the release fitting on the solenoid.

Discription:
Shock body is made out of 304 stainless steel and so is the internal shaft. The piston is made out of T-6 6061 billet aluminum and features a bi-directional seal and self lubricating teflon strap for years of service.

Port size= 1/4 npt on both ends (shocks will come with fittings to use 5/32 hosing).

Center hole to center hole demension = 20 inches with 13 inches of stroke.

There are spherical rod-ends at each end of the shocks to allow for misaligment.

Price:

Kits start at ...................................................$849.00

Remotes ........................................................$135.00

​Visit new website for this product www.trickyairbedshocks.com